How long are long swords

These swords were used in the middle-age and are well known for their beauty and purpose. The L ongsword is a traditional sword and is the same as the bastard sword. The sword can be used as a one-handed sword or t wo-handed sword. There is no such difference in that case. Before getting deeper into the facts related to bastard sword vs L ongswor d , let us discuss a bit about the bastard sword and Longsword individually.

What is a Bastard sword? The Bastard sword is also known and recognized as a long sword. Bastard sword was invented in England and then in France.

Bastard swords are just another way of classifying this sword. The sword developed as in the form of a longsword with time. People are continuously using these bastard swords for so many years.

Bastard swords are also known as hand-and-a-half swords. It has a long grip that allows them to use it as a two-handed sword. Why do they call it a bastard sword? The bastard sword has two edges blade along with a handle which was enough for two hands. The length of the bastard blade is inches. The handle of the bastard sword is about inches. The additional length of the bastard sword handle allows the blade to be held in two hands.

Samurais used it as a close contact weapon at that time. It takes so many hours for using this weapon. It was not easy to use it at that time as many hours would be spent on the training to use the sword. Also, many techniques were applied to use the sword correctly. It is a type of medieval-long sword. The Bastard sword was 1 st invented in England. This bastard sword can be used in both hands in a very comfortable way.

Bastard swords blades can be used as a very aggressive weapon. They were highly-priced so only the samurais and army-men could buy and use this dangerous weapon. This bastard sword blade could be the same length sword as a single-hand sword but the grip of the blade is enough to make it two-handed. This bastard sword was designed and remained an aggressive and effective killing tool.

The overall length of the sword is about mm and the weight of this bastard sword is 1. What is Longsword? People in Egypt invented the swords during the Bronze Age. The swords were invented for many purposes. Showing of results. Long Swords. Historical longswords served as medieval and Renaissance weapons, particularly notable for their sharp taper and fine point that allowed them to pierce or slip through gaps in armor.

With the advent of plate armor, swordsmen had less need to carry a shield for protection, instead using their off hand for a technique called half-swording, which gave greater control and thrusting power to the wielder of a medieval longsword. Knights wielding longswords also developed the tactic of repeatedly striking opponents with the pommel, leading to the phrase, To pummel someone.

Sometimes called war swords or battle swords, traditional longswords featured simple, cruciform hilts and straight, double-edged blades. Whether you want to hone your combat skills or display an excellent example of a medieval sword, you can find many great options here at Buying a Sword.

Our longsword replicas can easily serve as home decor, training swords, or re-enactment accessories. Display 12 per page. This 15th Century Hand and a Half Sword with Scabbard is a practical warriors sword with a hardy make and a versatile design, making it a great choice for the warrior who plans to wield their sword in a variety of ways. This 15th Century Hand and a Half Sword with Scabbard and Belt is a practical warriors sword with a hardy and versatile design that makes it a great choice for the warrior who plans to wield their sword in a variety of ways.

Agincourt War Sword Item Fans of medieval blade replicas are sure to appreciate the expert craftsmanship evident in the Agincourt War Sword. Forged by experienced master smiths, the striking functional sword is made from tough high carbon steel. Aesthetically pleasing is a great way to describe this sword, but do not think for a second that this sword is just a wall-hanger.

As nice as this Black Death Sword with Scabbard looks, it is also fully functional and battle-ready. Aesthetically pleasing is a great way to describe this sword, but do not think that this weapon is just a wall hanger. The Black Death Sword with Scabbard and Belt is as eye-catching as it is fully functional and battle-ready.

The Black Prince Sword with Scabbard is an accurate reproduction of an artifact discovered in the midth century, which was later identified by Ewart Oakeshott, an expert in medieval swords, as the blade of Prince Edward of Woodstock. This Black Prince Sword with Scabbard and Belt is a reproduction of an artifact discovered in the midth century, later identified by Ewart Oakeshott, an expert in medieval swords, as the blade of Prince Edward of Woodstock.

The Blue Masonic Longsword recalls that mysterious and intriguing group called the Freemasons. Add this sword to your weapon collection or decor.

It also looks great on display in your office. You can give it as a gift as well. Bosworth Long Sword Item Perfect for re-enactors, collectors, or modern warriors, the Bosworth Long Sword serves as an excellent historical sword replica and battle ready blade.

The medieval long sword looks stunning and feels great to use. Caledfwlch Sword Item Second one also seems to be more one-handed than two-handed.

And only the last one I would call a longsword. But length of the hilt is not always the most important thing. For example this sword has a seemingly pretty long hilt, but the blade looks so short and narrow that this sword can probably be freely used in one hand.

And on the other hand, some war swords have relatively short hilts but their weight suggests that they should be used mainly two-handed.

What I want to say is that when comparing different swords, even swords of the same general type, one might need to keep in mind their intended use.

A longsword intended to be used by a mounted warrior mainly in one hand would usually be quite different from a longsword intended to be used by an armored footman as a main weapon. And that in turn would be quite different from a longsword intended to be used by an unarmored person as his main weapon in a duel or for self-defense. Oh, one more thing. Usually for swords blade length is more important than the overall length so it would be good if you added it to your original post.

Aleksei Sosnovski wrote:. Hey again! I'm interested in longswords, so swords that are primarily meant for use with both hands. So, basically, swords that are intended for two-handed use, yet are not bidenhanders. I'm mainly interested in seeing how much our training tools reflect the actual longswords of the middle ages. It's more curiosity than anything else, really, as I'm sure most of our simulators fall within the specifications. Also, it might benefit folks wanting to do some DIY stuff.

Nathan Robinson wrote:. My own opinion differs from yours. I believe both swords are more oriented towards two-handed use, but the hilts and general proportions of the entire sword allow for one-handed use when necessary. Thank you for the responses! I'll check out the thread later today, currently there is a sampling of 15 swords. While the average lenght and the extremes are where i thought they'd be, I'm honestly surprised at the average weight.

I thought it'd be around 1,,6kg, but it's under 1,4! Also, i've included two swords that are post, but not by much Cheers! Posted: Thu 25 Oct, am Post subject:. Sorry for the double post; but I've managed to break through the first barrier of 20 swords. Right now there is a sample of 23 swords, with results similar to what i'd expect.

Granted, they are a bit longer on average, but not by much i expected to be average. That seem very odd to me Any contributions you guys can make will be greatly appreciated! Posted: Thu 25 Oct, pm Post subject:. Sword mentioned by Alen L a few posts above is a good example of the latter. Texts usually don't mention exact dimensions and weight of weapons and event paintings cannot tell us all the details. For example long hilt might be useful if one wants to use the sword in the manner of a couched lance.

I had 3 longswords, first weighing 1. I could use all of them in one hand. However I wouldn't use the first one for example with buckler while being unarmored. I would be simply too slow. Though in armor I would be quite OK. The second one is obviously quicker and I might use it with buckler while unarmored, but I wouldn't do it if I had a choice.

The third one would be as good in one hand as a dedicated one-hander and would be quite good in two hands as well. It was also rather compact, with both hilt and blade slightly shorter than those of the first two swords.

I would probably carry that for self defense if I had to. But for a duel I would choose a longer weapon and in battle I wouldn't use it as my primary weapon. One edge-to-edge block made by my opponent would very likely break it. Generalization is good. We see it for different polearms as well, though it is obvious that some things can be done with some polearms but cannot be done with others. We also see messer and one-handed sword used interchangeably with buckler, though it is obvious that messer with its nagel and blunt false edge could be used for things that are impossible for normal sword and vice versa.

Common sense existed back then so we should use it today too though we should be careful when using modern common sense in relation to medieval stuff. Actually we see same generalization today too. For example in my country one can get a permit to carry a handgun. But it's up to him to choose what handgun he wants.